User Manual
XTO 2.ie
Edition A3 - 05/2021
8
Information
Fixed guard but not solidly screwed to the Printing Unit:
The Printing Plate [PP] cannot be strongly screwed to the Printing Unit [PU] because it is necessary
to leave the passage to the packaging film [PF] to be printed.
Note:
During the installation it is necessary to fix the printing plate [PP] and the
printing unit [PU] so that the plate prevents finger access to the areas [A]
and [B] where the carriage with the print head moves.
On supports where there is an independent adjustment of the Printing Unit [PU] and the Printing
Plate [PP], it is always necessary to maintain a relative position between the two parts that prevents
access to dangerous areas. Also to obtain a good print quality, the print head must be positioned at
a distance from the edge of the rubber layer [RL], not less than 5 mm and that the Printing Plate
[PP] is always centered with respect to the Printing Unit [PU].
[PU]
[PF]
[PP]
Figure 9: Print plate
Figure 10: Print plate and Print Unit position
[t]
min. 5 mm
min. 5 mm
[RL]
[RL]
=
=
Summary of Contents for EIDOS XTO 2.ie
Page 2: ......
