User Manual
XTO 2.ie
Edition A3 - 05/2021
35
Operation
Label
The label parameters are automatically updated in the printer every time a new .LM1 file is loaded.
These label dimensions and parameters must be set (with EASYCODE program) during the label
creation. The label .LM1 file parameters in this page are view only.
- Width X:
label dimensions in the parallel direction to the print head dots line.
- Length Y:
label length in printing and carriage movement direction.
- X Shift:
the shift of the image along the dot line direction.
- Y Shift:
the shift of the image along the carriage movement direction.
Reprocessing
Automatic:
date or time are updated automatically every minute or texts containing progressive
numbering are updated without increasing the cycle time.
After Print:
the label is re-processed at the end of print while the carriage is returning in home
position.
Before Print:
this option will delay a little bit the print command execution; recommended for labels
with barcodes that contain date and time variables to be updated before every printing.
Number of labels:
number of prints each cycle for multi-tracks printing.
Print Pitch:
distance between the print start points for two consecutive labels.
Number of print:
number of prints.
You can see the preview of the label by clicking on the button in the left menu.
By clicking on the button is it possible to view the current PAF parameter (see chapter "Product
Description > Basic settings" of this manual).
Figure 50: label parameters view
Summary of Contents for EIDOS XTO 2.ie
Page 2: ......
