Novexx Solutions EIDOS XTO 2.ie User Manual Download Page 53

Page: 53 / 60

User Manual

XTO 2.ie

Edition A3 - 05/2021

XTO 2.ie with XLS 20x labeller

XTO 2.ie with XLS 20x labeller

Prerequisites for use and adjustment are the professional installation of the Novexx XLS 20x labeller

and its correct assembly with the XTO 2.ie printer

Read carefully the assembly instructions in the technical manual of the XTO 2.ie printer.
For any technical questions you may have that are not described in this manual, see:

→

The technical manual of the XTO 2.ie Printer

→

The user manual and the service manual of the labeller XLS 20x

→

Request a technical service

SYSTEM CONFIGURATION

The system is available as right-hand (RH) or left-hand (LH) version.

A Left (LH) version

B Right (RH) version

C Product on the conveyor belt

D Labelled product

E XTO touch panel (53SDK18)

F XLS 20x touch panel

G XTO 2.ie printer

H XTO 2.ie support (59SRSC5)

Figure 72: XTO 2.ie mounting on XLS 20x labeller

Summary of Contents for EIDOS XTO 2.ie





























































Search results

Summary of Contents for EIDOS XTO 2.ie

Reviews:

Related manuals for EIDOS XTO 2.ie

Brands by name

Popular brands

Novexx Solutions EIDOS XTO 2.ie, User Manual

Search results

Summary of Contents for EIDOS XTO 2.ie

Reviews:

Related manuals for EIDOS XTO 2.ie

Brands by name

Popular brands