manualshive.com logo in svg

Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Share
Download
Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010 Administration Manual Download Page 38

38

Sentinel Log Manager 1.0.0.4 Administration Guide

no

vd

ocx 

(e

n)

  

19

 Fe
bru
a

ry

 20
10

3. If an event meets the criteria for more than one of the data retention policies, the following 

guidelines are used to determine, which data retention policy should be applied:

Š

If the maximum retention period of a policy is shorter than the others, that policy is 
applied. (If the maximum retention period is not specified for a policy, then the policy is 
considered to have a long maximum retention period.)

Š

If multiple matching policies have the same shortest maximum retention period, the policy 
with the longest minimum retention period is applied.

Š

If multiple matching policies have the same shortest maximum retention period and the 
same longest minimum retention period, the system arbitrarily applies one of the policies.

3.4  Configuring Disk Space Usage

If archiving is enabled, the event data is copied to the archive location after two days and a local 
copy remains until space is available. Raw data is moved to the archive location approximately after 
one hour. 

1

Log in to the Sentinel Log Manager as an administrator.

2

Click the 

storage

 link in the upper left corner of the page.

The 

Storage

 tab is displayed on the right pane of the page.

3

Click the 

Configuration

 tab.

In the 

Disk Space Usage

 section, the 

Local Storage Size

 field displays the total storage size 

currently used by the Sentinel Log Manager.

4

Specify the local storage utilization value:

Š

Specify a value to start the data archiving from local storage when the specified 
percentage of value is full.

Š

Specify a value to stop the data archiving from local storage when the specified 
percentage of value is full.

Archive storage size specifies the value of the archive storage space.

5

Specify the maximum archive size to be used as part of the total available archive size.

Summary of Contents for SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands