122
Sentinel Log Manager 1.0.0.4 Administration Guide
no
vd
ocx
(e
n)
19
Fe
bru
a
ry
20
10
11
Select either of the following:
Not Encrypted (HTTP):
Establish an unsecured connection.
Encrypted (HTTPS):
Establish a secured connection. If you select the encrypted
(HTTPS) option, you are optionally allowed to specify a Server validation mode and an
Integrator key pair.
12
Select the
Send alerts if no events are received in specified time period
option to allow the
sentinel link to generate alerts (internal events) that can be monitored by a system
administrator.
These alerts are generated when the sentinel link has not received any events for a specified
time period. The internal event type for this alert is
NoEventsReceived
.
If the
Send alerts if no events are received in specified time period
option is enabled, the user is
allowed to specify the following two parameters:
Time period (minutes):
The time period is the number of minutes that must elapse
without receiving an event before the sentinel link generates the
NoEventsReceived
alert.
Field
Description
Server Validation
Mode
Select either of the following:
None- no server certificate required:
The Integrator does not
validate the receiver's certificate.
Strict - server certificate required:
The Integrator always
verifies the receiver's certificate when connecting to the receiver.
If this option is selected, the Integrator immediately attempt to
retrieve the receiver's certificate over the network and validate
that it is issued by an authorized CA.
If the certificate is not validated for some reason, it is still
presented to the user to accept or reject. The certificate is
considered to be valid if the user accepts it. When a validated
certificate is acquired, it is stored in the Integrator's
configuration. Henceforth, the Integrator allows communication
only with a receiver that provides that certificate during the initial
connection setup.
Integrator Key Pair
Select either of the following:
None - server does not require client certificate:
The
receiver system does not validate the sender certificates. Select
this option if the receiver's client authentication type is
configured to
Open
.
Custom - server validates (strict) client certificate:
The
receiver system validates the sender certificates. Select this
option if the receiver's client authentication type is configured to
Strict
. If the receiver system performs a strict validation, it
imports a trust store, which contains all the sender certificates
that it trusts.
After selecting this option, click the
Import Key Pair
button to
import a key pair. The key pair you import must match one of the
certificates that is included in the trust store, which is imported
by the receiver system.
Summary of Contents for SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010
