manualshive.com logo in svg

Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Share
Download
Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010 Administration Manual Download Page 120

120

Sentinel Log Manager 1.0.0.4 Administration Guide

no

vd

ocx 

(e

n)

  

19

 Fe
bru
a

ry

 20
10

Š

One or more Sentinel Log Managers can forward important data to either Sentinel or Sentinel 
RD, which are SIEM (Security Information Event Management) systems. These systems 
provide real-time visualization of data, advanced correlation and actions, workflow 
management, and integration with identity management systems.

Š

Sentinel Link must be configured in two locations: on the Sentinel Log Manager system that 
sends the data and on the Sentinel Log Manager, Sentinel, or Sentinel RD system that receives 
the data.

The following instructions describe how to configure the system sending the data:

1

Set up the Sentinel Link connection to receive messages from another Sentinel or Sentinel Log 
Management system.
For more information about configuring Sentinel systems for receiving events, see 

Sentinel 

Link Solution Guide (http://support.novell.com/products/sentinel/zip/utilities/Sentinel-
Link_Solution.pdf)

.

2

Log in to the Sentinel Log Manager as an administrator.

3

Click 

rules

 in the upper left corner of the page.

4

The 

Rules

 tab is displayed on the right pane of the page.

5

Select the 

Actions

 tab.

6

Click the 

Add Action

 link on the right side of the screen.

7

Select the Send to Sentinel Link action type.
The 

Sentinel Link

 screen appears.

Summary of Contents for SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands