manualshive.com logo in svg

Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Share
Download
Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010 Administration Manual Download Page 128

128

Sentinel Log Manager 1.0.0.4 Administration Guide

no

vd

ocx 

(e

n)

  

19

 Fe
bru
a

ry

 20
10

7.4.1  Activating the Forward Events To Another Sentinel 
System Rule

The Forward Events To Another Sentinel System rule is installed with Log Manager, but it is in the 
inactive (off) state. To forward the system events to another Sentinel system, the rule must be 
activated, and the Sentinel Link Integrator settings must be configured. 

1

Log in to the Sentinel Log Manager as an administrator.

2

Click 

rules

 in the upper left corner of the page.

3

The 

Rules

 tab is displayed on the right pane of the page.

The Forward Events To Another Sentinel System rule is displayed under the 

Rules

 tab.

4

To activate the Forward Events To Another Sentinel System rule, click the check box next to 
the rule.
If the rule is activated, a 

Successfully activated the rule

 message is displayed.

7.4.2  Configuring Sentinel Link Integrator Settings

In addition to activating the Forward Events To Another Sentinel System rule, you must also 
configure the Sentinel Link Integrator settings. 

Configuring the Send to Sentinel Link settings is same as configuring the Sentinel Link Integrator 
settings. The Send to Sentinel Link settings configures the Sentinel Link Integrator instance that is 
pre-installed on Sentinel Log Manager.

To configure the Send to Sentinel Link settings, refer to 

“Sending the Events to a Sentinel Link” on 

page 119

.

Summary of Contents for SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands