Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Page: 118 / 168

118 Sentinel Log Manager 1.0.0.4 Administration Guide
no
vd
ocx
(e
n)
19
Fe
bru
a
ry
20
10
The Email screen appears.
7 Specify an action name. The action name should be unique.
8 Specify the hostname or IP address of an available SMTP server.
9 Specify the port number of an available SMTP server.
10 If the SMTP server requires authentication, specify a username and password.
If required, click
Test to validate the hostname or IP address, port, username, and password
fields.
11 Specify an address from where the e-mail messages are sent.
12
Specify one or more e-mail addresses for recipients, separated by commas.
13 Specify the subject line for the e-mail.
14
Click Save . If the action is configured, a
Successfully Added Action
message is displayed.
The newly created action appears under the Actions tab.
Sending the SNMP Traps
All Sentinel Log Manager events that meet the filter criteria for which the Send SNMP Traps action
is defined are sent to the specified SNMP addresses.
To configure the Send SNMP Traps action, you need the connection information for an SNMP
server, including the IP address and the port number.
1
Log in to the Sentinel Log Manager as an administrator.
2 Click rules in the upper left corner of the page.
3
The Rules tab is displayed on the right pane of the page.
4 Select the Actions tab.
5
Click the Add Action link on the right side of the screen.