Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Page: 139 / 168

Managing License Keys 139
no
vd
ocx
(e
n)
19
Fe
bru
a
ry
20
10
Adding a License Key Through Command Line When the License has Expired
You can add license through the command line by using the softwarekey.sh script. This is the only
method to add the license if the license has expired and either the system does not come up or it or
all attempts to log in fails.
1 Log in to the Novell Sentinel Log Manager server as
novell
.
2 Change to the
Install_Directory /bin
directory.
3 Run the
softwarekey.sh
script.
4 Specify the license key, then press
Enter
.
5 Restart the Novell Sentinel Log Manager server.
9.2.2 Viewing License Features
1 Log in to the Sentinel Log Manager as an administrator.
2 Click the About link in the upper left corner of the page.
3 Click the License s tab.
The Licenses section specifies the features, hostname, serial number, and expiry date of the
added licenses.
Š The Max EPS shows the maximum number of EPS value among the various licenses.
For example, if Sentinel Log Manager contains EPS licenses with values of 500, 1500,
2500, and 7500, the 7500 EPS value is displayed in the
Max EPS field.
Š
The Licensed Features section lists the features and expiry date of the license key.
9.2.3 Deleting a License Key
NOTE: You can only delete an expired license.
1
Log in to the Sentinel Log Manager as an administrator.
2 Click the About link in the upper left corner of the page.
3
Click the License s tab.
The expired date is displayed inside a red box with the Expired on <mm/dd/yy> text. The
delete license link is displayed next to the expiry date box. The delete license link is displayed
only when a license expires.
4 Click the delete license link. A confirmation message is displayed.
5 Click Delete .