Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Page: 101 / 168

Reporting 101
no
vd
ocx
(e
n)
19
Fe
bru
a
ry
20
10
The selected report result is renamed under the report definition.
6.8 Marking Report Results as Read or Unread
When a report result is created under a report definition, the report result is in unread state. An
unread report result appears with a blue dot next to the report result in the Report Viewer. When you
view a report result, the blue dot is removed to indicate that the report has been read. You can also
manually mark a report result as read or unread without viewing it.
In the Report Viewer, each of the report template or definition shows the number of unread reports
next to it.
NOTE: The reports marked as read or unread are on a per-user basis. Each user can have a different
set of read or unread reports.
Š
Section 6.8.1, “Marking a Single Report Result as Read,” on page 101
Š
Section 6.8.2, “Marking Single Report Result as Unread,” on page 102
Š
Section 6.8.3, “Marking Multiple Report Results as Read,” on page 102
Š
Section 6.8.4, “Marking Multiple Report Results as Unread,” on page 103
6.8.1 Marking a Single Report Result as Read
1 Select an unread report result (report result with a blue dot next to it) under a report definition
in the Report Viewer pane of the page.
2 Click the more drop-down list in the Report Viewer pane and click Mark Read .
The report result changes to the read state without a blue dot next to the report result.