manualshive.com logo in svg

Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010, Administration Manual

Share
Download
Novell SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010 Administration Manual Download Page 167

Syslog Collector Package Policy

F

167

no

vd

ocx 

(e

n)

  

19

 Fe
bru
a

ry

 20
10

F

Syslog Collector Package Policy

Event sources, Connectors, and Collectors can be auto-created based on policy information 
contained in installed Syslog Collector packages. These policies are specified in special properties 
of the connection modes in a SYSLOG connection method. A connection mode might contain an 
Applications, UniqueMatchingRule, or UniversalSyslogCollector property. These are described 
below: 

NOTE: 

Only one of these properties should be specified.

Applications: 

This property contains a list of comma-separated application names for the syslog 

messages the Collector and connection mode can handle. Each application name in the list should be 
unique for all Collectors and connection modes. If multiple Collector plug-ins contain the same 
application name, only the first one spotted is used as authoritative. The log appliance logs a 
message stating that an application name is defined in multiple Collectors or connection modes, and 
also states, which one it selected as authoritative.

UniqueMatchingRule: 

This property contains a regular expression that can be used to find a 

matching syslog message. A device that generates a matching syslog message is assigned to this 
Collector and connection mode.                                                                                               

It is important that matching rules from different Collectors should never match the same message, 
to avoid ambiguity about which Collector/connection mode the device that generated the matching 
message should be assigned to.

UniversalSyslogCollector: 

This property should have a value of true. It specifies that the Collector/

connection mode with this property is used for messages whose Collector/connection mode cannot 
be determined. It is the catch-all Collector and connection mode. There should be only one 
Collector/connection mode with this property. If more than one Collector and connection mode 
exists with this property, the log appliances logs an error and indicates which one it is using. 

For the Collector and connection mode, only one of the above properties should be specified. If 
more than one property is specified, the log appliance logs a message and indicates which among the 
three properties it uses. It chooses the properties in the following order: 1) Applications, 2) 
UniqueMatchingRule, and 3) UniversalSyslogCollector

Summary of Contents for SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands