Home
/
Novell
/
LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009
/
Manual

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009, Manual, Page: 31 / 236

Share

Page: 31 / 236

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual Download Page 31

3

If you are installing from CD, insert the SUSE Linux Enterprise Point of Service
add-on product CD. If you are installing from a different source, provide the
necessary source. Click Continue.

4

Confirm the SUSE Linux Enterprise Point of Service license agreement and click
Next.

5

Select the type of server to be installed or Detailed Selection to choose any
combination of patterns or packages you need. Click Accept to perform the instal-
lation.

SUSE Linux Enterprise Point of Service Installation

23

«
...
29
30
31
32
33
...
»

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Reviews:

No comments