manualshive.com logo in svg

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009, Manual, Page: 163 / 236

Share
Download
Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual Download Page 163

Indicates the destination path for the output
file.

[--dest=

output_path

]

This parameter is optional. If it is not de-
fined, POSCDTool creates the files as fol-
lows:

• The

AdminServer.conf

file is cre-

ated in

/etc/SLEPOS/

.

• The

/var/lib/SLEPOS/

Distribution.xml

document is

created in .

Indicates which imageclasses should be
checked for source discs availability.

[--imageclass
=sles-i586,sled-i586,...]

This option restricts the checking to these
imageclasses. If more than one imageclass
is specified, the list should be comma sepa-
rated with no spaces.

POSCDTool verifies if you have the CD
source that corresponds to each image class
before it generates the

Distribution

.xml

document.

IMPORTANT

The ImageClass element in the distribu-
tion source document must match the
ImageClass element in the image spec-
ification document.

Managing Image Source Files

155

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Reviews:

No comments