Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual Download Page 171 | Manualshive

Page: 171 / 236

background image

12

Building Images with the
Image Creator Tool

SUSE Linux Enterprise Point of Service uses KIWI as the main tool for creating Point
of Service system images. YaST provides Image Creator, a GUI front-end to KIWI for
easy image building. It is recommended to use this graphical front-end to build images.
Image Creator can be started from YaST by choosing Miscellaneous > Image Creator.

When Image Creator is started, the Image Creator Configuration Overview dialog is
shown. It lists image configurations saved in the

/var/lib/SLEPOS/system

di-

rectory. You can add, delete or edit configurations from the list by using appropriate
buttons in the dialog. Images can be built from a newly added configuration or a from
the configuration opened by Edit.

Building Images with the Image Creator Tool

163

«
...
169
170
171
172
173
...
»

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Reviews:

No comments

Related manuals for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Brand: VMware Pages: 19

SECURITY MANAGEMENT CENTER 2.5

Brand: AVIRA Pages: 39

SENTINEL LOG MANAGER 1.0.0.5 - 03-31-2010

Brand: Novell Pages: 168

Brand: DataCard Pages: 2

APPLICATION STACK 1.3 RELEASE

Brand: Red Hat Pages: 26

CERTIFICATE 8.0 RELEASE NOTES

Brand: Red Hat Pages: 34

RSA RADIUS Server 6.1

Brand: RSA Security Pages: 118

VB Directory System

Brand: VBrick Systems Pages: 21

StreamPlayer v4.4

Brand: VBrick Systems Pages: 32

COLDFUSION MX 61-CFML

Brand: MACROMEDIA Pages: 806

ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL...

Brand: KAPERSKY Pages: 295

TIVOLI SC32-0129-00

Brand: IBM Pages: 82

PCM NATIVE DUAL DELAY

Brand: Lexicon Pages: 36

PCM NATIVE CHORUS

Brand: Lexicon Pages: 36

Brand: Garmin Pages: 4

Brand: AudioRealism Pages: 18

Brand: Minolta Pages: 88

NOD32 ANTIVIRUS - FOR KERIO

Brand: ESET Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands