manualshive.com logo in svg

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009, Manual

The Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 is a comprehensive manual designed to aid users in effectively managing their Linux enterprise systems. This informative guide is available for free download from manualshive.com, providing valuable insights and step-by-step instructions for optimized product usage.

Share
Download
background image

14.1.1 Command Line Options

admind

has the following command syntax:

admind [-vIP] [configfile] [

options

]

Table 14.1, “

admind

Command Line Options” (page 186) summarizes the

admind

command line options.

Table 14.1

admind Command Line Options

Description

Option

Does not require

admind

to look up identities to authenticate

the calling user. This option is not recommended because it
poses a security risk to your system.

-I

(uppercase i)

Does not require

admind

to verify the hostname. This option

is not recommended because it poses a security risk to your
system.

-P

Provides verbose output to syslog.

-v

14.1.2 admind.conf

The standard configuration information for admind is located in

/etc/SLEPOS/

admind.conf

. The file format typically appears as follows:

S=hostname1
S=hostname2
U=username1
U=username1
X:0=init 0
X:6=init 6
X:r=/etc/init.d/rc/POSApplication restart
(...)

186

SUSE Linux Enterprise Point of Service Guide

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Reviews:

No comments

Related manuals for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

CSSN ScanShell 3000 User Manual preview
ScanShell 3000
Brand: CSSN Pages: 8
TANDBERG Codian Remote Management API Reference Manual preview
Codian Remote Management API
Brand: TANDBERG Pages: 66
VMware VCENTER CHARGEBACK 1.5 - API Manual preview
VCENTER CHARGEBACK 1.5 - API
Brand: VMware Pages: 150
Mitsubishi WiFi-Doc Client for iOS User Manual preview
WiFi-Doc Client for iOS
Brand: Mitsubishi Pages: 10
ICP GDT monitor Manual preview
GDT monitor
Brand: ICP Pages: 60
Patton electronics SmartNode Series Software Configuration Manual preview
SmartNode Series
Brand: Patton electronics Pages: 655
Samsung UN55C7000WF Quick Setup Manual preview
UN55C7000WF
Brand: Samsung Pages: 2
Samsung UN40C7000WFXZA Troubleshooting Manual preview
UN40C7000WFXZA
Brand: Samsung Pages: 4
Samsung UN46ES8000FXZA Fast Track Troubleshooting preview
UN46ES8000FXZA
Brand: Samsung Pages: 5
Samsung UN40C7000WF (Spanish) Software Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Samsung UE40C7000WW User Manual preview
UE40C7000WW
Brand: Samsung Pages: 7
Samsung SVM-­S1 Quick Reference Manual preview
SVM-­S1
Brand: Samsung Pages: 8
Samsung SyncMaster T23A750 Service Manual preview
SyncMaster T23A750
Brand: Samsung Pages: 46
Samsung UN40ES6820F Service Manual preview
UN40ES6820F
Brand: Samsung Pages: 85
Samsung SyncMaster C27A750X (Spanish) Manual Del Usuario preview
SyncMaster C27A750X
Brand: Samsung Pages: 102
Samsung SmarThru 2 User Manual preview
SmarThru 2
Brand: Samsung Pages: 113
Samsung UN60D6450UF (Spanish) E-Manual preview
UN60D6450UF
Brand: Samsung Pages: 222
Samsung UN60D7050VF (Spanish) E-Manual preview
UN60D7050VF
Brand: Samsung Pages: 248

Brands by name

Popular brands

Load more brands