Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual Download Page 218 | Manualshive

Page: 218 / 236

background image

Table B.1

posInitBranchserver.sh Options

Description

Option

Reinitializes Branch Server, default values are
loaded from an existing Branch Server configura-
tion file or from file specified by

FILE

.

-r

or

--reinitialize

[=

FILE

]

Specifies the path to SLEPOS offline installation
file.

-f

or

--file

=

FILE

Performs unattended installation (

-f

or

-r

options

are needed).

-n

or

--noninteractive

Displays the version of the script being used.

-V

or

--version

Displays available options and their description.

-h

or

--help

Displays basic usage information.

--usage

Files

/etc/SLEPOS/named/named.conf
/etc/SLEPOS/template/dhcpd.conf.header.template
/etc/SLEPOS/template/dns-zonefile.header.template
/etc/named.d/ldap_generated/dns-zonefile.header
/etc/SLEPOS/dhcpd/dhcpd.conf.header
/etc/SLEPOS/template/resolv.conf.template
/etc/resolv.conf
/etc/sysconfig/network/routes

B.3.3 posInitAdminserver.sh

The purpose of

posInitAdminserver.sh

is to configure the OpenLDAP directory

server software and to create the initial data in the LDAP directory. You are prompted
to enter the company name, country abbreviation, and the LDAP administration pass-
word. You can also enable or disable SSL communication. Company name and country
abbreviation are used to compose the LDAP base DN in the form

o=company,c=us

.

210

SUSE Linux Enterprise Point of Service Guide

«
...
216
217
218
219
220
...
»

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Reviews:

No comments

Related manuals for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Brand: M-Audio Pages: 4

Brand: M-Audio Pages: 4

DRUM AND BASS RIG

Brand: M-Audio Pages: 3

Brand: Drobo Pages: 6

Brand: Mitsubishi Pages: 64

Brand: GE Pages: 82

Brand: Southern Company Pages: 13

Ohioedge CRM+BPM

Brand: Source Technologies Pages: 36

Brand: Ulead Pages: 100

APPLICATION STACK 2.1 RELEASE

Brand: Red Hat Pages: 26

VSHIELD APP 1.0.0 UPDATE 1 - API

Brand: VMware Pages: 144

3CR15600 - Enterprise Management Suite

Brand: 3Com Pages: 218

SUPERSTACK 3 WEBCACHE 3000

Brand: 3Com Pages: 362

MapCreate Canada 6.3

Brand: LEI Extras Pages: 1

057B1-41A111-1001 - AutoCAD LT 2010

Brand: Autodesk Pages: 574

Brand: FARONICS Pages: 2

Brand: LXE Pages: 260

ACCULINK 7800-D1-999

Brand: Paradyne Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands