Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual Download Page 172 | Manualshive

Page: 172 / 236

background image

Figure 12.1

The Image Creator Configuration Overview

NOTE: Logging In as

root

User

In order to be able to log in as

root

on the terminal, you need to create the

root

user and assign a password to it in the Users tab.

NOTE: Creating Images from Scratch

Only image templates shipped with SUSE Linux Enterprise Point of Service are
supported. If you want to prepare your own image from scratch, the SLE-11-
SDK product must be used and

kiwi-desc-*

packages installed. The is no

L3 support available for the SLE-11-SDK product.

164

SUSE Linux Enterprise Point of Service Guide

«
...
170
171
172
173
174
...
»

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Reviews:

No comments

Related manuals for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

DEVICE FILTER MAC

Brand: FARONICS Pages: 4

Brand: Yamaha Pages: 30

Brand: IBM Pages: 4

NETWORK AND SECURITY MANAGER 2010.4 - REV1

Brand: Juniper Pages: 244

Brand: ShoreTel Pages: 25

TV708LL/A - NeatWorks For Mac

Brand: NeatWorks Pages: 33

DATA SYNCHRONIZER - UPDATE 1

Brand: Novell Pages: 9

WINDOWS LIVE MESSENGER - LEARN MORE

Brand: Blackberry Pages: 18

D-NE329SP - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 2

D-NE20 - Atrac Cd Walkman

Brand: Sony Pages: 2

D-NE326CK - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 2

D-NE329SP - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 32

D-NE1 - Portable Cd Player

Brand: Sony Pages: 34

D-NE326CK - Atrac Cd Walkman Portable Player

Brand: Sony Pages: 35

D-NE1 - Portable Cd Player

Brand: Sony Pages: 116

Brand: I.R.I.S. Pages: 10

IRISPOWERSCAN 9.0

Brand: I.R.I.S. Pages: 153

Brand: FujiFilm Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands