Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual Download Page 160

Page: 160 / 236

11.1.1 The

--copy

Option

Copies the SUSE Linux Enterprise Point of Service CDs to the distribution directory
structure.

NOTE

The distribution directory structure is referenced in the

AdminServer.conf

and

Distribution.xml

files so KIWI can locate the RPMs required to build

the image.

For more information, see Section 11.3.1, “Copying the SUSE Linux Enterprise Point
of Service CDs” (page 159).

Table 11.1

POSCDTool Command Options for --copy

Description

Option

Indicates the source media to be copied
(CD/DVD, directory, or ISO CD).

[

--type=dvd|cd|dir|iso]

This parameter is optional. If it is not defined,
POSCDTool assumes the source media is CD.
The

iso

option is not currently supported.

Indicates the path to the source media.

--source=

path

For a CD, the path is expressed as

/media/

NAME

For a directory, the contents of the directory are
treated as a CD.

For an ISO CD, the path is expressed as a full
path including the filename.

Indicates the destination for the copied data. The
default directory is

/var/lib/SLEPOS/

[--dest=

path

]

dist

, with subdirectories containing informa-

152

SUSE Linux Enterprise Point of Service Guide

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009













































































































































































































































Search results

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Reviews:

Related manuals for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Brands by name

Popular brands

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009, Manual

Search results

Summary of Contents for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Reviews:

Related manuals for LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Brands by name

Popular brands