Novell Designer for Identity Manager 3.5, Manual, Page: 400 / 510

Share

Page: 400 / 510

Novell Designer for Identity Manager 3.5 Manual Download Page 400

400

Policies in Designer 3.5

no

vd

ocx

(e

n)

13

Ma
y 20

09

If Entitlement

Performs a test on entitlements of the current object, in either the current operation or the Identity
Vault. The test performed depends on the specified operator.

Fields

Name

Specify the name of the entitlement to test for the selected condition.

Operator

Select the condition test type.

Value

Contains the value defined for the select operator. The value is used by the condition. The
operators that contain the value field are:

Equal

Not Equal

Changing To

Changing From

Not Changing To

Not Changing From

Operator

Returns True when...

Available

The named entitlement is available in either the current operation or the
Identity Vault.

Not available

Available would return False.

Equal

There is a value available for the specified attribute in the destination data
store that equals the specified value when compared by using the
specified comparison mode.

Not Equal

Equal would return False.

Changing

The current operation contains a change (modify attribute or add attribute)
of the named entitlement.

Not Changing

Changing would return False.

Changing From

The current operation contains a change that removes a value (remove
value) of the named entitlement, which has a value that equals the
specified value, when compared by using the specified comparison mode.

Not Changing From

Changing From would return False.

Changing To

The current operation contains a change that adds a value (add value or
add attribute) to the named entitlement. It has a value that equals the
specified value, when compared by using the specified comparison mode.

Not Changing To

Changing To would return False.

«
...
398
399
400
401
402
...
»

Summary of Contents for Designer for Identity Manager 3.5































































































































































































































































































































































































































































































































Reviews:

No comments