Novell Designer for Identity Manager 3.5, Manual, Page: 111 / 510

Using Predefined Rules 111
no
vd
ocx
(e
n)
13
Ma
y 20
09
4 Name the policy.
5 Use the default location or browse and select another location to place the policy in the driver.
6 Select Open Editor after creating policy , then click Next .
7 Select DirXML Script for the type of policy, then click Finish .
8 A file conflict window appears with the message “
Before editing this item you need
to save. Do you wish to save the editor’s changes and continue?
” Click Yes .
The Policy Builder is launched and the new Command Transformation policy is saved.
9 Continue with Importing the Predefined Rule .
8.1.2 Importing the Predefined Rule
1 Right-click in the Policy Builder, then click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After .
2
Select Command Transformation - Create Department Container - Part 1 , then click OK .
3 Right-click in the Policy Builder and click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After .
4
Select Command Transformation - Create Department Container - Part 2 , then click OK .