Novell Designer for Identity Manager 3.5, Manual, Page: 110 / 510

110 Policies in Designer 3.5
no
vd
ocx
(e
n)
13
Ma
y 20
09
The Predefined Rules dialog box displays a list of the available rules.
8.1 Command Transformation - Create
Departmental Container - Part 1 and Part 2
This rule creates a department container in the destination data store, if one does not exist.
Implement the rule on the Command Transformation policy in the driver. You can implement the
rule on either the Subscriber or the Publisher channel or on both channels.
There are two steps involved in using the predefined rules: creating a policy in the Command
Transformation policy set and importing the predefined rule. If you already have a Command
Transformation policy that you want to add this rule to, skip to
Importing the Predefined Rule .
Š Section 8.1.1, “Creating a Policy,” on page 110
Š
Section 8.1.2, “Importing the Predefined Rule,” on page 111
Š Section 8.1.3, “How the Rule Works,” on page 112
8.1.1 Creating a Policy
1 From the Outline view or the Policy Flow view, select the Publisher or Subscriber channel.
2 Select the Command Transformation policy set in the Policy Set view, then click Create or add
a new policy to the Policy Set icon to create a new policy.
3
Click Create a new policy , then click Next .