Novell Designer for Identity Manager 3.5, Manual, Page: 142 / 510

142 Policies in Designer 3.5
no
vd
ocx
(e
n)
13
Ma
y 20
09
8.19 Placement - Subscriber By Dept - LDAP
Format
This rule places objects from one container in the Identity Vault into multiple containers in the data
store based on the OU attribute. Implement the rule on the Placement policy in the driver. You can
implement the rule only on the Subscriber channel.
There are two steps involved in using the predefined rules: creating a policy in the Placement policy
set and importing the predefined rule. If you already have a Placement policy that you want to add
this rule to, skip to
Importing the Predefined Rule .
Š
Section 8.19.1, “Creating a Policy,” on page 142
Š
Section 8.19.2, “Importing the Predefined Rule,” on page 142
Š
Section 8.19.3, “How the Rule Works,” on page 143
8.19.1 Creating a Policy
1 From the Outline view or the Policy Flow view, select the Subscriber channel.
2 Select the Placement policy set in the Policy Set view, then click Create or add a new policy to
the Policy Set icon to create a new policy.
3 Click Create a new policy , then click Next .
4 Name the policy.
5
Use the default location or browse and select another location to place the policy in the driver.
6
Select Open Editor after creating policy , then click Next .
7 Select DirXML Script for the type of policy, then click Finish .
8
A file conflict window appears with the message “
Before editing this item you need
to save. Do you wish to save the editor’s changes and continue?
” Click Yes .
The Policy Builder is launched and the new Placement policy is saved.
9
Continue with Importing the Predefined Rule .
8.19.2 Importing the Predefined Rule
1
Right-click in the Policy Builder, then click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After .
2 Select Placement - Subscriber By Dept - LDAP format , then click OK .