Novell Designer for Identity Manager 3.5, Manual, Page: 125 / 510

Using Predefined Rules 125
no
vd
ocx
(e
n)
13
Ma
y 20
09
8.9.2 Importing the Predefined Rule
1
Right-click in the Policy Builder, then click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After .
2 Select Input or Output Transformation - Reformat Telephone Number from (nnn) nnn-nnnn to
nnn-nnn-nnnn , then click OK .
3 Expand the predefined rule.
4
Edit the condition by double-clicking the Conditions tab.
5 Define the condition you want to have occur when the telephone number is reformatted.
6
Click OK .
7 Save the rule by clicking File > Save .
8.9.3 How the Rule Works
This rule is used when you want to reformat the telephone number. You define the condition that is
to be met when the telephone number is reformatted.
8.10 Input or Output Transformation - Reformat
Telephone Number from nnn-nnn-nnnn to (nnn)
nnn-nnnn
This rule transforms the format of the telephone number when a desired condition is met. Implement
the rule on the Input or Output Transformation policy. You can implement the rule on either the
Subscriber or the Publisher channel or on both channels.
There are two steps involved in using the predefined rules; creating a policy in the Input or Output
Transformation policy set and importing the predefined rule. If you already have an Input or Output
Transformation policy that you want to add this rule to, skip to
Importing the Predefined Rule .
Š Section 8.10.1, “Creating a Policy,” on page 126
Š
Section 8.10.2, “Importing the Predefined Rule,” on page 126
Š Section 8.10.3, “How the Rule Works,” on page 127