Novell Designer for Identity Manager 3.5, Manual, Page: 147 / 510

Share

Page: 147 / 510

Novell Designer for Identity Manager 3.5 Manual Download Page 147

Testing Policies with the Policy Simulator

147

no

vd

ocx

(e

n)

13

Ma
y 20

09

Figure 9-1

XDS Builder

Click the

Source

tab in the Policy Simulator to display the input document in XML. The XDS

Builder creates this input document. You can modify the XML by editing the XML directly or using
the XDS Builder.

The XDS Builder allows you to select the operation type as well as provide the operation
parameters, attributes, and values. XDS Builder saves the parameters and values of the simulator for
the current Designer session. To make the simulator input available after Designer has been shut
down, save the input document to disk.

After you have created the XDS input document, you need to analyze the results. For more
information, see

Section 9.5, “Simulating a Policy,” on page 163

.

The Policy Simulator has several different components. Each component helps create the input
document to test the policy against.

Section 9.2.1, “Source,” on page 148

Section 9.2.2, “Import an XDS Document,” on page 148

«
...
145
146
147
148
149
...
»

Summary of Contents for Designer for Identity Manager 3.5































































































































































































































































































































































































































































































































Reviews:

No comments