Novell Designer for Identity Manager 3.5, Manual, Page: 399 / 510

Share

Page: 399 / 510

Novell Designer for Identity Manager 3.5 Manual Download Page 399

Pre-Identity Manager 3.5 Conditions

399

no

vd

ocx

(e

n)

13

Ma
y 20

09

If Destination DN

Performs a test on the destination DN in the current operation. The test performed depends on the
specified operator.

Fields

Operator

Select the condition test type.

Value

Contains the value defined for the select operator. The value is used by the condition.

Equal

Not Equal

In Container

Not in Container

In Subtree

Not in Subtree

Operator

Returns True when...

Available

There is a destination DN available.

Not Available

Available would return False.

Equal

There is a destination DN available, and it equals the specified value
when compared by using semantics appropriate to the DN format of the
destination data store.

Not Equal

Equal would return False.

In Container

There is a destination DN available, and it represents an object in the
container, specified by value, when compared by using semantics
appropriate to the DN format of the destination data store.

Not in Container

In Container would return False.

In Subtree

There is a destination DN available, and it represents an object in the
subtree, specified by value, when compared by using semantics
appropriate to the DN format of the destination data store.

Not in Subtree

In Subtree would return False.

«
...
397
398
399
400
401
...
»

Summary of Contents for Designer for Identity Manager 3.5































































































































































































































































































































































































































































































































Reviews:

No comments