manualshive.com logo in svg

Novell Designer for Identity Manager 3.5, Manual, Page: 149 / 510

Share
Download
Novell Designer for Identity Manager 3.5 Manual Download Page 149

Testing Policies with the Policy Simulator

149

no

vd

ocx 

(e

n)

  

13

 Ma
y 20

09

Identity Vault attribute names to the corresponding application attribute by using the Schema 
Map policy, as long as the driver references the Schema Map policy. However, the values for 
the attributes might be in an incorrect format.

4

Click 

OK

 if a warning message is displayed.

5

Click 

Next

 to test the policy against the object.

9.2.4  Use an Application Object As a Template

The Policy Simulator allows you to use an existing Application object to populate the input 
document.

1

In the toolbar, select 

Browse to an object in the Application to use as a template

 

.

2

Designer opens an Application Browser so you can browse to the object you want to use as a 
template.
Designer uses Independent Driver Services (IDS) to access the application. If you encounter an 
error while connecting to the application, use the IDS Trace view to see where the error 
occurred.
To open the IDS Trace view, right-click the driver object in the Outline view, then select 

Show 

IDS Trace

. IDS trace must be loaded before connecting to the application in order to capture 

any error messages.

NOTE: 

Simulator access to application attributes is based on the rights granted to the 

application user specified in the driver configuration.

3

Browse to and select the desired object, then click 

OK

.

The Simulator populates the input document based on the values in the selected application 
object.

4

Click 

Next

 to test the policy using the input document.

9.2.5  Clear All Parameters

The Policy Simulator allows you to clear all parameters, attributes, and values that have been set. 
You can create a new input document without launching the XDS Builder again.

1

In the toolbar, select 

Clear

 

.

2

Specify information to create a new input document.

9.2.6  Configuration Options

The Policy Simulator allows you to set configuration options for the simulation.

1

In the toolbar, select 

Configure options for the simulation

 

.

2

Specify the desired 

XSL Trace Level

.

If you have XSL in your policy and you want to see the XSL trace results, specify a value. If 
the value is set to 0, no information is displayed. The range of the trace value is 0 to 4.

3

Specify the desired 

Driver Trace Level

.

To set the results of the simulation, set a value in the 

Driver Trace Level

 field. The range of the 

trace value is 0 to 5.

Summary of Contents for Designer for Identity Manager 3.5































































































































































































































































































































































































































































































































Reviews:

No comments