Novell Designer for Identity Manager 3.5, Manual, Page: 131 / 510

Using Predefined Rules 131
no
vd
ocx
(e
n)
13
Ma
y 20
09
There are two steps involved in using the predefined rules; creating a policy in the Matching policy
set and importing the predefined rule. If you already have a Matching policy that you would like to
add this rule to, skip to
Importing the Predefined Rule .
Š
Section 8.13.1, “Creating a Policy,” on page 131
Š
Section 8.13.2, “Importing the Predefined Rule,” on page 131
Š
Section 8.13.3, “How the Rule Works,” on page 132
8.13.1 Creating a Policy
1 From the Outline view or the Policy Flow view, select the Publisher or Subscriber channel.
2 Select the Matching policy set in the Policy Set view, then click Create or add a new policy to
the Policy Set icon to create a new policy.
3 Click Create a new policy , then click Next .
4
Name the policy.
5 Use the default location or browse and select another location to place the policy in the driver.
6
Select Open Editor after creating policy , then click Next .
7 Select DirXML Script for the type of policy, then click Finish .
8
A file conflict window appears with the message “
Before editing this item you need
to save. Do you wish to save the editor’s changes and continue?
” Click Yes .
The Policy Builder is launched and the new Matching policy is saved.
9
Continue with Importing the Predefined Rule .
8.13.2 Importing the Predefined Rule
1
Right-click in the Policy Builder, then click New > Predefined Rule > Insert Predefined Rule
Before or Insert Predefined Rule After .
2 Select Matching - by attribute value , then click OK .
3 Expand the predefined rule.