Novell Designer for Identity Manager 3.5, Manual, Page: 156 / 510

156 Policies in Designer 3.5
no
vd
ocx
(e
n)
13
Ma
y 20
09
Figure 9-6
Hex Editor
Š
Section 9.4.1, “Accessing the Hex Editor,” on page 156
Š Section 9.4.2, “Importing Data into the Hex Editor,” on page 157
Š
Section 9.4.3, “Inserting Data in the Hex Editor,” on page 157
Š Section 9.4.4, “Appending Data in the Hex Editor,” on page 158
Š
Section 9.4.5, “Editing Data in the Hex Editor,” on page 159
Š Section 9.4.6, “Reverting Changes in the Hex Editor,” on page 161
Š
Section 9.4.7, “Deleting Data in the Hex Editor,” on page 161
Š Section 9.4.8, “Moving the Cursor in the Hex Editor,” on page 162
Š
Section 9.4.9, “Exporting Data from the Hex Editor,” on page 162
9.4.1 Accessing the Hex Editor
The Hex editor is inside of the Policy Simulator. The Hex editor is opened for all attributes that have
an eDirectory syntax of octet string or unknown and an application syntax type of octet. You can
also access the Hex editor by following these steps:
1 Launch the Policy Simulator and do the following:
1a
Set the Simulation Point to Publisher Creation .