Disconnected
In this state, the
GO
button is available and the signal strength icon is
visible.Click
GO
to initiate a connection.
Connecting
In this state, the Sprint PCS Connection Manager is attempting to make
a connection. During this action, the display will progress from
“Connecting”to “Authenticating,”to “Authenticated.” The signal
strength icon is visible and the
GO
button changes to
Stop
.
If you attempt to establish a Sprint PCS Vision connection that requires a
password, a dialog box appears. Enter the relevant information and click
OK
to continue the connection process.
To cancel the connection, click
Stop.
Connected
Once the connection is established, the message area displays
“Connected”and the transfer/receive icon is now visible.
For other messages, see “Settings”on page 36 and “Troubleshooting
Tips”on page 41
.
2B: Sprint PCS Connection Manager Software
27
Summary of Contents for Merlin S620
