NovaScale r410 e1, User Manual, Page: 87 / 325

User Guide
87
www.bull.com
Figure 53: Attaching the Extension to the Rail
A: Multi-pin adapter
B: Bracket with square holes
C: Bracket with round holes
a. Press together the round pins of the multi-pin adapter and insert the
bracket with the square holes on the round pins.
b. Release the round pins of the multi-adapter.
4. Determine the position in which you wish to install the system into the rack.
5. Align the left slide rail with its mounting holes.
6. Hold the slide rail in the desired rack-mounting position.
7. Depending on whether you are using, or not, the extensions:
■
With the extensions: use a washerplate and 2 M5 screws (it only fits one
way) to secure the rear bracket of the rail to the mounting rail.
■
Without the extensions: press the multi-pin adapter mounting pins (see
Figure 51) together and secure the rear bracket of the rail to the mounting
rail.
Note: Ensure the slide rail is level.
8. Fully extend the slide rail to its fully extended (locked) position.
9. Press the slide extension release levers to release the lock.
10. Move the slide rail in and out throughout its entire range of motion and make
certain it does not bind.
Caution
If you notice any binding, recheck the mounting positions.