NovaScale r410 e1, User Manual, Page: 131 / 325

User Guide
131
www.bull.com
User Name
It is not possible to delete a user – only change its’ name. To change the name of a user,
use the following command:
Syntax:
syscfg /un<user#> <new-name>
Example: syscfg /un5 necuser
User Password
To change the password of a user, run the following command:
Syntax:
syscfg /up<user#> <new-password>
Example:
syscfg /up5 necpass
With the IP address and User IDs configured, an IPMI-based management system can
now communicate directly with the BMC.
SELVIEW
SELVIEW (System Event Log Viewer) is provided to view the contents of the BMC’s
System Event Log and save the log to a file. This file can then be sent to a support team
for analysis.
This utility is only available for the Windows Operating System.
Refer to the release notes for further information on using SELVIEW .