NovaScale r410 e1, User Manual, Page: 168 / 325

User Guide
168
www.bull.com
8. Slide the optical drive out through the front of the system. See letter “D” in the
figure below.
Figure 113: Removing the Optical Drive
9. Remove the four screws that hold the optical drive to the brackets as shown in
the figure below. Save these screws for future use.
Figure 114: Attaching the Optical Drive Bracket to the Brackets
Note: If you are installing a replacement optical drive, skip
the rest of these steps and instead continue with “Installing a
Slimline Optical Device” on page 164 , step 7.