NovaScale r410 e1, User Manual, Page: 249 / 325

User Guide
249
www.bull.com
Updating the System
To ensure normal system operation you should update your system using the following
procedures.
1. Logon to the system using the administrator account or other account which is
a member of the Administrators group.
2. Insert the ExpressBuilder disc into the optical device drive.
[Master Control Menu] is displayed on the screen.
3. Click [Setup] with left mouse button and click U [Update system] section.
4. Follow the on-screen instructions to continue system update.
5. Click [Restart Computer] to restart the system.
6. Remove the ExpressBuilder disc from the optical device drive immediately
after clicking [Restart Computer].
Caution
If you change the configuration of the system (by adding or
removing hardware or Operating system software components)
or repair the system, you must run the system update again.