NovaScale r410 e1, User Manual, Page: 199 / 325

User Guide
199
www.bull.com
4. Locate the memory upgrade sockets on the motherboard.
Figure 143: Upgrading the Memory
5. Press the plastic clips at the outer edge of the socket away from the memory
module. This ejects the memory module from the socket (see “A” on
Figure 143). Do not touch the module's metal "fingers." Store the module in an
anti-static bag (available at electronic supply stores) or a cardboard box.
6. Align the new module with an empty memory socket. Make sure the notch on
the module aligns with the key in the socket. The module is designed to install
into the socket in only one way (see “B” on Figure 143).
7. Press the module firmly into the socket (see “C” on Figure 143). If you have
difficulty installing a module, do not force it! Carefully remove the module,
then check the alignment of the module's notch with the one in the socket.
Then re-install the module.
8. Make sure the locking clips at either end of the module click closed (see “D”
on Figure 143). If the brackets do not secure themselves to the module,
carefully remove the module, then reinstall it.
9. Replace the server cover. Refer to “Installing the Server Cover” on page 161 .
Note: The amount of installed memory will be automatically
detected by the system.
AF002309
DIMM 1A
Socket
DIMM 2A
Socket
DIMM 2B
Socket
DIMM 1B
Socket
A
C
D
B