NovaScale r410 e1, User Manual, Page: 104 / 325

User Guide
104
www.bull.com
Selecting System Site
Warning
Observe the following instructions to use the system safely. Failure to
follow these instructions may result in death or serious personal injury.
See
“General Safety Information” on page 132
for details.
■
Do not use the system in any unapproved place.
■
Do not connect the ground line to a gas pipe.
Caution
Failure to follow the instructions listed below may cause a fire, per-
sonal injury, or property damage. See
“General Safety Information”
on page 132
for details.
■
Do not install the system where the load may be concen-
trated on a specific point.
■
Do not exceed the rating power of the wiring.
Do not install the system in the places listed below, doing so may cause malfunctions to
occur.
■
Place of uneven or slanting floor
■
Place enduring drastic temperature changes (near a heater, air conditioner, or
refrigerator)
■
Place where intense vibrations may be generated
■
Place where corrosive gazes are generated, chemicals are nearby, or chemicals
may be accidentally sprayed over.
■
Place where a carpet that is not anti-static is laid.
■
Place near a device generating intense magnetic fields (such as a TV, radio,
broadcast/communication antenna, power transmission wire, and electromagnetic
crane) is placed. If it cannot be avoided, contact your sales agent to request proper
shielding measures.
■
Place where the power cord of the server must be connected to an AC outlet that
shares the outlet of another device with large power consumption.
■
Place near equipment that generates power noise (e.g., contact spark at power-on/
power-off of commercial power supply through a relay). If you must install the
server close to such equipment, request separate power cabling or noise filter
installation from your sales agent.