7
2.4.1 Data Acquisition Module
The data acquisition module is configured at the factory for the following sensors:
1. Wind speed and direction
2. Barometric pressure
3. Temperature and relative humidity
4. Rain gauge
To verify the sensor setup, press "m" two times to go to the main menu. Select item "1",
Station setup. From the setup menu select "5", Add or remove sensors. Press "Y" to
continue. The sensor configuration screen will appear showing all of the presently
enabled sensors. Refer to Appendix 1 for instructions, should any sensor that you plan
to use not be enabled.
WeatherPort WS-16-A
Modular Weather Station
Setup Menu
1. Station name: Weather Station
2. Units of measure: English
3. Averaging period: 15 minutes
4. Logging interval: 15 minutes
5. Date & Time: 10/12/2005 08:27
6. Add or remove sensors
7. Enter alarm thresholds
8. Communications settings
9. Return to main menu
Enter your selection [1 - 9]:6
WeatherPort WS-16-A
Modular Weather Station
Sensor Configuration
Sensor Type Model Input Units
Calibration
===========================================================================
1. Wind Speed 200-WS-01/02 +P1 mph
2. Precipitation All models P3 IN 0.0100
3. Generic Power Monitor on A0 A0 V
4. Pressure 100-WS-16BP A2 InHg
4. Humidity 110-WS-16TH A4 %
5. Temperature 225-501/110-WS-16TH *A5 F
6. Wind Direction 200-WS-02/05 -A7 Deg
+ Indicates primary wind speed channel
- Indicates primary wind direction channel
* Indicates primary temperature channel
Add sensor [A], delete sensor [D], or quit [Q]:_
Figure 2: Station Setup Menu & Sensor Configuration Menu
Summary of Contents for 110-WS-16
Page 37: ......
