30
Auxiliary Temperature
(Optional Sensor)
The auxiliary temperature sensor is a thermistor attached to a two conductor cable.
Connect one conductor to A6 terminal and the other conductor to a GROUND terminal.
INITIALIZATION OF THE AUXILIARY TEMPERATURE SENSOR
Press "M" and "Enter" to get the main menu.
From the main menu press "1", Station setup.
From the station set up menu press "6", Add or remove sensors. Then press "Y", then
"Enter".
From the sensor type menu select "4", Temperature. Then press "Enter".
From the temperature sensors menu select "1", 100-WS-16T. Then press "Enter".
The menu then asks: Enter temperature offset or press Q to quit. Press "Q".
From the sensor input channel menu select number "A6". Then press "Enter".
If you intend to add another sensor select "A".
If you do not want to add another sensor select "Q".
You will be asked if you are sure that you want to erase memory.
If you have added or deleted a sensor select "Y" if not select "N" and press "Enter".
Solar Radiation
(Optional Sensor)
Connect the solar radiation sensor to the terminal strip on the back of the data
acquisition module. This sensor has a two wire cable. Attach the WHITE conductor to
the A1 terminal and the BLACK conductor to a GROUND terminal.
INITIALIZATION OF THE SOLAR RADIATION SENSOR
Press "M" and "Enter" to get the main menu.
From the main menu press "1", Station setup.
From the station set up menu press "6", Add or remove sensors. Then press "Y", then
"Enter".
From the sensor type menu select "8", Solar Radiation. Then press "Enter".
From the solar radiation menu select "1", 240-120/WS-16SR. Then press "Enter".
Enter the calibration factor from the calibration sheet, which was supplied with the
sensor. Then press "Enter".
Summary of Contents for 110-WS-16
Page 37: ......
