14
3.2.6 Add or Remove Sensors
Press "5", Add or remove sensors. The menu displays the following warning, You must
off-load data before changing sensor configuration. Logging memory will be
automatically cleared if changes are made. Do you want to continue? [Y or N]: Press
"Y" and the sensor configuration screen will appear. If all of the sensors that you intend
to use are shown as being configured, press "Q" and "Enter". If you wish to add or
delete a sensor, press "A" for add or "D" for delete and follow the instructions presented
on the menu.
3.3 Power Outage Warning
The data entered using the station setup procedure is automatically stored in the
system’s memory. The data will remain intact even if there is a power outage. All data
collected will also remain intact if there is a power outage. However, the system will not
report or log data during periods of power outage. When reviewing data logs, gaps in
the store data may be attributed to power outages.
3.4 Current Observations
Press "2" (Output Format) at the main menu to access the most frequently used
screens. These are the current observations screens, and they are shown in Figure 4
on page 10 (Observation Screen) and Figure 6 on page 15 (Row and Column Display
Screen). Selecting the Row and Column Display, “2'” ON THE Output Format Screen
brings up the Select Sampling/Output Interval Menu.
Select Sampling/Output Interval
1. 5 seconds
2. 10 seconds
3. 20 seconds
4. 30 seconds
5. 60 seconds
Select the refresh rate desired and the Row and Column display will start.
The Current Observations screens show the values currently being measured by the
station’s sensors. These values are updated every five seconds and provide a running
record of weather conditions. The topmost line on the main text display screen shows
the station name, current date, and time.
Note: If at any time you get no response when pressing "m" two times (repeatedly) to
get the main menu, you can turn the WS-16 module off and then back on to “reboot”
the station. No data will be lost.
Summary of Contents for 110-WS-16
Page 37: ......
