31
From the sensor input channel menu select number "A1". Then press "Enter".
The sensor configuration menu appears and it will show:
Sensor type
Model
Input
Calibration
Solar Radiation
240-120/WS-16SR
A1
74
If you intend to add another sensor select "A".
If you do not want to add another sensor select "Q".
You will be asked if you are sure that you want to erase memory.
If you have added or deleted a sensor select "Y" if not select "N" and press "Enter".
ALOHA Configuration
To use the WS-16-A with NOAA’s ALOHA (Areal Locations of Hazardous
Atmospheres) program the following sensors must be activated: temperature, wind
speed, wind direction, and battery voltage. Any other sensors should be deactivated.
To activate the battery voltage function: Press "m" twice to get to the Main Menu.
From the main menu press "1", station setup.
From the station set up menu press "5", Add or remove sensors. Then press "Y", then
"Enter".
From the sensor select menu "1" station setup.
From the station setup menu press "5" Add or remove sensors, Then press "Y". Then
"Enter".
From the sensor select menu select "1" Generic. Then press "Enter".
From the generic sensors menu select "3", Power monitor on A0. Then press "Enter".
From the sensor input channel, select "4", Analog Input A0.
Summary of Contents for 110-WS-16
Page 37: ......
