32
The sensor configuration screen should look like the following:
WeatherPort WS-16-A
Modular Weather Station
Sensor configuration
Sensor Type Model Input Units
Calibration
===========================================================================
1. Wind Speed 200-WS-01/02 +P1 Mph
2. Generic Power Monitor A0 V
3. Temperature 255-501/110-WS-16TH *A5 F
4. Wind Direction 200-WS-02/05 -A7 Deg
+ Indicates primary wind speed channel.
- Indicates primary wind direction channel.
* Indicates primary temperature channel.
Add sensor [A], Delete sensor [D], or quit [Q]:_
When you are ready to switch the WS-16-A: Go to the main menu. Press "m" twice.
From the Main Menu press "2" Output Format Menu, then press "Enter".
This message will appear at the bottom of the Output Format Menu:
Selecting ALOHA will immediately change serial port parameters to:
1200 bps, no parity, 8 data bits, 1 stop bit.
Do you want to make these changes? [Y or N]:
Press "Y" and the WS-16-A immediately switches into the ALOHA mode and starts
transmitting the ALOHA weather data for use with the ALOHA program.
Summary of Contents for 110-WS-16
Page 37: ......
