Notifier NFS-3030/E, Programming Manual

Page: 138 / 144

NFS-3030 Programming Manual P/N 51345:C 11/4/03
138
INDEX
NFS-3030/E
Displayless Mode 10
Two basic configurations 10
Node label 19
Node number 18
For standalone panel 18
Range 18
To view 18
Non-fire activations
Event logging 32
Non-latching 132
Note
120 seconds is the maximum delay after...(NYC
timer) 83
A module with a releasing Type ID cannot be forced
off. 70
A printout of all the messages.... (Custom Action
messages) 32
A releasing circuit with this Type Code re-
quires...(REL END BELL) 95
A setting of NO (disable) will disable keyswitch op-
eration. 19
A ULC Release circuit with this Type Code re-
quires...(REL CKT ULC) 96
ACS devices programmed for acknowledge, signal
silence...(local control=no) 19
All events except troubles are annunciated during
programming... 17
An AHJ timer does not comply with UL Standard
864. 86
An NYC timer does not comply with UL Standard
864. 83
Clearing all programs is not necessary when...(Ver-
iFire) 17
Deleting points that are active or in trouble... 53
Do not include ZF8 in the zone map of Panel Cir-
cuits used for....(releasing, zone coding)
104
If the point is not installed...(saving entries) 40
No program menus will display if a user pass-
word...(Alter status level) 17
The IZM-8RK module does not participate in Walk
Test... 45
The panel setting LCM LOCAL MODE must be set
to Yes... 37
,
41
The second shot switch can only be used...(MAN
REL DELAY) 94
This soft key will not appear for modules with Type
ID...(silence option) 45
This value may not exceed 30 seconds for ULC... 22
This value must be 20 minutes for ULC... 23
To change the language of the remote display 29
When changing from an 80-column or 80-column
supervised... 27
When the ACCEPT soft key is pressed to save an
equation... 48
NYC Abort Switch 83
O
Obscuration 132
Occupancy Schedule 28
,
39
Holidays 33
Output activations
Event logging 32
Output circuit 132
Overwrite (logic equation screen) 48
P
Panel Circuit 132
See Module, Panel Circuit
See Point Program
Panel circuit modules are not suitable for... 88
Panel programming, see Programming, Panel settings
Panel settings
19
AC Fail Delay 22
Alarm Verification timer 22
Auto Silence 23
Auxiliary trouble reporting 27
Custom Action message 31
Default Settings 20
Default Timers 23
Display Address 20
Event logging 32
Event Ordering 19
Holiday menu 32
Local Control 19
Local mode 20
Local Receive mode 19
Loop configuration 30
Loop programming 31
Maximum verification count 22
Panel circuit bell coding 20
PAS 23
Password 28
Piezo 19
Poll types 31
Presignal delay 23
Proprietary Supervising Station 19
Reminder Menu 20
,
21
Remote Display Menu 29
Silence Inhibit 22
Supervision 27
Main power supply address 27
Printer 27
Tamper input 27
Timers 22
Trouble reminder 21
Verify-Prealarm 23
Weekly occupancy schedule 28
Panel sounder 132
Panel Timers 22
PAS (Positive Alarm Sequence) 103
Inhibit switch 103
Setting 23
www.PDF-Zoo.com