General Information
Program
NFS-3030 Programming Manual P/N 51345:C 11/4/03
17
Section 3 Program
3.1 General Information
The NFS-3030/E operates with two levels of programming: Program, and Alter Status.
Program level allows change to the essential control panel functions such as point functions, system
functions, and passwords. Program level change requires the master password, or a user password
that allows access to the Program level. All password information can be changed with a master
password only.
Alter Status level allows change to operating parameters, such as detector sensitivity, or time/date,
or Walk Test. The master password, or a user password that allows access to the Alter Status level,
is required.
Note: All events except troubles are annunciated during programming. When an annunciated event
occurs, the panel will automatically exit the programming screen and the Event Counts menu
screen will appear.
To access the Program level, press the Program/Alter Status soft key on the Main Menu and at the
prompt enter a master password, or a user password that allows access to the Program level. The
following screen will display.
Note: No program menus will display if a user password is entered that has access to Alter Status
level only: the Alter Status menu will be the sole menu choice.
Figure 3.1 Program/Alter Status Screen
Press a soft key with the word “program” in its menu to bring up the associated program menu.
When programming the panel for the first time, press the
DELETE PROGRAM MENU
soft key,
which brings up the Delete Program Menu screen (Refer to Figure 3.44). Press the
CLEAR ALL
PROGRAMMING
button, then
ACCEPT
, to ensure that the panel is set to defaults and clear of
programs.
Note: Clearing all programs is not necessary when initial programming with a database
downloaded from VeriFire™.
The logical sequence for initial programming is to program the panel parameters first, then to
program the individual points through autoprogramming and/or point programming.
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A
F R I J A N 2 1 , 2 0 0 2
P R O G R A M / A L T E R S T A T U S
A L T E R S T A T U S M E N U
D E L E T E P R O G R A M M E N U
A U T O P R O G R A M M E N U
P A N E L P R O G R A M M E N U
P O I N T P R O G R A M M E N U
B A C K
www.PDF-Zoo.com
Summary of Contents for NFS-3030/E
Page 60: ...Program Autoprogram Menu 60 NFS 3030 Programming Manual P N 51345 C 11 4 03 www PDF Zoo com...
Page 128: ...Type Codes FlashScan Codes 128 NFS 3030 Programming Manual P N 51345 C 11 4 03 www PDF Zoo com...
Page 134: ...Glossary Glossary 134 NFS 3030 Programming Manual P N 51345 C 11 4 03 www PDF Zoo com...
Page 142: ...NFS 3030 Programming Manual P N 51345 C 11 4 03 142 INDEX www PDF Zoo com...