Notifier NFS-3030/E, Programming Manual

Page: 52 / 144

Program Delete Program
52 NFS-3030 Programming Manual P/N 51345:C 11/4/03
3.5 Delete Program
Press the
D E L E T E P R O G R A M M E N U
at the
P R O G R A M / A L T E R S T A T U S M E N U
menu to
display the screen below.
Figure 3.44 Delete Program Menu Screen
Soft Keys
CLEAR ALL PROGRAMMING: Press to remove all panel, panel module, loop, point and ACS
programming information, as well as logic and trouble zone equations. Pressing this key removes
everything except passwords. A confirmation screen will display asking the user to confirm the
deletion command. Pressing this key causes a reboot.
CLEAR:PANEL
Press to remove all programmed panel setting information from control panel
memory. This does not remove ACS programming. A confirmation screen will display asking the
user to confirm the deletion command. Pressing this key causes a reboot.
CLEAR:PANEL MODULES Press to remove all panel module programming information. A
confirmation screen will display asking the user to confirm the deletion command. Pressing this
key causes a reboot.
CLEAR LOOPS Press to scroll through the options: ALL, LOOP 1, LOOP 2,...., LOOP 10. Stop at
the desired option. Press ACCEPT to delete all loop programming for the selected option. Pressing
this key causes a reboot.
DELETE POINT
To delete a point, press this soft key to display the Delete Point screen. Pressing
this key may cause a reboot.
CLEAR ACS: Press to remove all ACS programming from panel memory. A confirmation screen
will display asking the user to confirm the deletion command. Pressing this key causes a reboot.
ACCEPT: Press to clear all programming for the selected loop option for CLEAR LOOPS . A
confirmation screen will display asking the user to confirm the deletion command.
D E L E T E P R O G R A M M E N U
C L E A R : P A N E L C L E A R A L L P R O G R A M M I N G
C L E A R : P A N E L M O D U L E S C L E A R A C S
C L E A R L O O P S : A L L A C C E P T
D E L E T E P O I N T B A C K
www.PDF-Zoo.com