Panel Program Menu (2)
Program
NFS-3030 Programming Manual P/N 51345:C 11/4/03
31
Soft Keys
POINT SELECT:
Pressing this soft key will invoke the cursor at the underlined field. Enter the
loop number desired (01 through 10) in the yy of the Lyy format.
NEXT/PREVIOUS SELECTION:
Press either key to go forward or back through the loop
selections.
ACCEPT:
Press to proceed to the Loop Point Programming screen.
Loop Point Programming
Figure 3.18 Loop Point Programming Screen
Soft Keys
INSTALLED:
Press this soft key to choose YES or NO, depending on whether an SLC is installed
at this address.
FlashScan and CLIP Mode
FlashScan devices can be programmed to run in either CLIP or FlashScan mode. The types can not
be mixed on a loop: for example, if Loop 1 is programmed with a FlashScan module poll, CLIP
modules may not be used on that loop.
A detector’s LEDs will light a steady green for several seconds while it is subjected to a detector
test during FlashScan polling. Each detector is tested this way on a regular basis. During the short
time the LEDs are on steady, the detector is not providing fire protection.
DETECTOR
POLL:
Press to select
FLASHSCAN
or
CLIP
loop polling.
MODULE
POLL:
Press to select
FLASHSCAN
or
CLIP
loop polling.
RAPID
POLL:
For CLIP mode only - enable or disable Rapid Poll for CLIP. This feature will poll
the first 20 modules more often to speed response on manual pull stations.
WIRING
STYLE:
Press to select the NFPA wiring style (4 or 6) of the loop. If Style 6 is entered
when the wiring is Style 4, a trouble message will be generated at the panel.
BLINK
MODE:
Press to enable (
YES
) or disable (
NO
) detector LED blinking for this loop.
3.3.5 Custom Action Message
A Custom Action Message appears when the
MORE
INFORMATION
soft key is pressed when an
event is displayed on the Event Counts screen. This panel supports up to 100 Custom Action
L O O P P O I N T P R O G R A M M I N G
I N S T A L L E D : Y E S
B L I N K M O D E : Y E S
D E T E C T O R P O L L : C L I P
M O D U L E P O L L : C L I P
R A P I D P O L L : E N A B L E D
A C C E P T
W I R I N G S T Y L E : 6 B A C K
www.PDF-Zoo.com
Summary of Contents for NFS-3030/E
Page 60: ...Program Autoprogram Menu 60 NFS 3030 Programming Manual P N 51345 C 11 4 03 www PDF Zoo com...
Page 128: ...Type Codes FlashScan Codes 128 NFS 3030 Programming Manual P N 51345 C 11 4 03 www PDF Zoo com...
Page 134: ...Glossary Glossary 134 NFS 3030 Programming Manual P N 51345 C 11 4 03 www PDF Zoo com...
Page 142: ...NFS 3030 Programming Manual P N 51345 C 11 4 03 142 INDEX www PDF Zoo com...