TROUBLE ACKNOWLEDGEMENT
The
DOWNWARDS CURSOR
Key allows to display, on the second and third line, all zones in trouble status, as
follows:
Acknowledgement is carried out when all the events, on trouble file, have been displayed by using the
DOWNWARDS
CURSOR
key. The events are displayed from the first to the last event, in chronological order.
Press
ESC
key to leave trouble display.
NOTE
:
A
) Reset, Control Silence and Buzzer Silence, are not allowed during trouble acknowledgement.
B
) Reset is allowed only after carring out all event acknowledgement.
CONTROL SILENCE - SILENCED CONTROL RESET - EVACUATION
CONTROL SILENCE: in Alarm or Trouble conditions, the first pression of this key silences all indicating applian-
ces wired to control modules that have been programmed as silenceable.
To execute the signal silence, the operator has to know Level 1 Password.
SILENCED CONTROL RESET: in Alarm or Trouble conditions, the second pression of this key, clears all alarms
or troubles in the system, and all general controls that have been programmed as silenceable.
EVACUATION: during normal condition, the first pression of this key, after a confirmation request, activates all
general outputs and all programmable controls.
EVACUATION STOP: during normal condition, the second pression of this key, after a confirmation request,
deactivates all general outputs and all programmable controls
.
BUZZER SILENCE
This key allows the buzzer silence.
LAMP TEST
Lamp Test can be executed only in normal condition, by pressing ESC key.
ALARM OR TROUBLE RESET
This key clears all Alarms or Troubles in the system.
»
N.B.:reset is allowed only after all event (Alarms or Troubles) acknowledgement.
In order to reset the events, the operator has to know LEVEL 1 PASSWORD.
Page 2
Installation and Operating Manual
CFP-600-Prog-1.VP
NOTIFIER ITALIA
Rev. B.1
Doc. M-131.1-CFP600-ENG
A1:Z11 ALARM
| A04
T1:Z01 LINE SHORT C. | G03
FILE
| D00
T1:Z01 LINE SHORT C. | E00
The second line shows the number of the zone in trouble status
The third line shows a max.16-character programmable label
mapped to the zone.
