APPENDIX B -
MENU ITEM LIST
CFP-600-Prog-5.VP
Installation and Operating Manual
Page 21
Doc. M-131.1-CFP600-ENG
Rev. B.1
NOTIFIER ITALIA
USER MENU
ENABLE RELEASE CHANNELS
DISPLAY ZONE STATUS
CHANGE ZONE STATUS / ENABLE-DISABLE
CHANGE DAY-NIGHT MODE
DISPLAY HISTORICAL LOG
CHANGE PREALARM RECOGNITION TIME
ALARM COUNTER
CHANGE DATE/TIME
CHANGE LEVEL 1 PASSWORD
TEST MENU
DISPLAY LINE STATUS
CHANGE CONTROLS - ENABLE/DISABLE STATUS
SELECT ZONE FOR WALK TEST MODE
DISPLAY FIRMWARE REVISION
CHANGE LEVEL 2 PASSWORD
CONFIGURATION MENU
CHANGE ZONES - INCLUDE/EXCLUDE STATUS
PROGRAMMING THE CBE EQUATION
CHANGE SERVICE ENABLING STATUS
CHANGE ZONE PARAMETERS
CHANGE VERIFICATION TIMES
PROGRAMMING THE REALY MAPPING
ENABLING THE RELAY SIGNAL SILENCE
CHANGE ZONE DESCRIPTION
CHANGE SYSTEM TIME DELAY
CHANGE ALARM TIME PARAMETERS
PROGRAMMING THE ALARM CONTROL MODULTION
PROGRAMMING THE RELEASE ZONE MAPPING
CHANGE RELEASE TIME
SELECT EVENT TYPE FOR HISTORICAL LOG
PROGRAMMING THE SYSTEM NAME
CLEARING THE CONTROL PANEL MEMORY
CHANGE LANGUAGE DISPLAY
CHANGE ALL LEVEL PASSWORDS
Reset Time
Waiting time after an alarm in Walk test
Maximum Time in Day Mode
Minimum Time for Mains Trouble signal
Prealarm control Stand-by Time
Alarm control Stand-by Time
Sounder control Stand-by Time
Memory Verification Time
Initiating Circuit for Remote Reset
Initiating Circuit for Remote Signal Silence
Mains Trouble Signal
Battery Trouble Signal
Power Supply Trouble Enabling
Sounder Trouble Enabling
16-relay Board Installation
Release Board Installation
Enabling operation of Manual Release 1
Enabling operation of Manual Release 2
Prealarm Time
Alarm Time
Sounder Control Activation Time
Walk-Test and Line test max Time
2nd Alarm Waiting Time
Evacuation Time
Release Actuation Time
Release Repetition
Troubles
Reset
Configuration
Test Mode
