Norwood The Grain Handler 10, Operator'S Manual, Page: 71 / 130

3 - INSTALLATION
3-31
13. Mesh the "Auger Flighting"
15
together and make sure
you have at least 1/2" of engagement on the mounting
bracket. Tighten the
(Qty. 4) "3/8"-16 x 1-3/4 Bolts" 6 to
31 ft-lbs to the "Backboard Extension" 7 temporarily.
Do not tighten the jam nuts at this moment.
(See Fig. #
3-76)
15
6
6
7
1/2"
Fig. # 3-76 Installing New Standard Drive Wheel Flighting
Extension (Step 3)
12. Lower the Power Sweep assembly to the grain bin floor.
13. Remove the
"Lifting Strap" .
14. Loosen the (Qty. 4) "3/8"-16 x 1-3/4 Bolts" 6 and adjust
the "Standard Drive Wheel & Flight Extension"
14
so that the outside face of the "Drive Wheel" 17 is 6.0"
(152.4mm) from the inside of the "Grain Bin Wall" 16 .
(See Fig. # 3-77)
Fig. # 3-77 Installing New Standard Drive Wheel Flighting
Extension (Step 4)
6.0 "
6
6
15. Tighten the
(Qty. 4) "3/8"-16 x 1-3/4 Bolts"
snug. (See
Fig. # 3-77)