Norwood The Grain Handler 10, Operator'S Manual, Page: 48 / 130

3 - INSTALLATION
3-8
18. Install the Drying / Aeration floor to the manufacturer's
specifications.
19. Seal the areas in the "Grain Bin Floor" 24 that was cut
to fit around the hoppers with the "Hopper Flanges" 22 .
Use "Self-Drilling Screws" 23 to attach the flanges to
the "Grain Bin Floor" 24 .
(See Fig. # 3-18)
23
24
22
22
Fig. # 3-18 Install Hopper Flanges
20. Caulk any cracks or openings with a good quality silicone
or butyl based sealant.
(See Fig. # 3-19)
Fig. # 3-19 Caulk Around Hopper Flanges
21. Install the "Lower Bin Wall Plate" 25 to seal the
"U-Trough Tube"
7
and opening that was cut in the
grain bin wall. Attach with carriage bolts or screws. The
"Upper Bin Wall Plate" 26 overlaps the "Lower Bin
Wall Plate" 25 by 1/2" to allow for proper watershed.
(See Fig. # 3-20)
25
1/2"
7
26
Fig. # 3-20 Install Bin Wall Plates
22. Caulk any cracks or openings and fill cavities in corruga -
tions with a good quality silicone or butyl based sealant.
(See Fig. # 3-21)
Fill Cavities
In Corrugations
Fig. # 3-21 Caulk Around Bin Wall Plates