Norwood The Grain Handler 10, Operator'S Manual, Page: 101 / 130

5 - MAINTENANCE
5-11
100 Hours Or Monthly
Check The Gearbox Oil Levels
Lower Gearbox
1. Ensure the grain bin is completely empty of all product.
2. Remove the Power Sweep by following the instructions
in reverse assembly order on the following pages... (See
Page # 3-9) (Steps 24, thru. 29).
3. Remove the (Qty. 4) "5/16"-18 x 7/8 Bolts" 1 , and the
"U-Trough Gearbox Cover" 2 .
(See Fig. # 5-10)
Fig. # 5-10 Remove Bolts & Gearbox Cover
2
1
4. Re-install the (Qty. 4) "5/16"-18 x 7/8 Bolts" 1 back
onto the
"Lower Gearbox Cover" 3
. (See Fig. # 5-11)
3
1
Fig. # 5-11 Re-Install Bolts
IMPORTANT
Failure to re-install the lower gearbox cover bolts could
cause the cover to come off the gearbox and spill oil, and
loss of internal gearbox components.
5. Remove the
"1/8" X 2 Hairpin" 4
&
"3/8" Flat Washer"
5
from the "Gearbox Shifter Rod" 6 .
(See Fig. # 5-12)
6
5
4
Fig. # 5-12 Removing Gearbox
6. Remove the (Qty. 4) "3/8"-16 X 1 Bolts" 7 , and the (Qty.
4) "3/8" Split Lock Washers"
8
. (See Fig. # 5-13)
8
7
8
7
7
7
Fig. # 5-13 Removing Gearbox