NorthStar 961X Operation And Reference Manual Download Page 169 | Manualshive

Page: 169 / 374

background image

Chapter 7 - Creating Avoidance Points

961 Operations and Reference Manual Rev. D

Page 7-13

Editing an avoidance point

You can change any characteristics of an avoidance point at ei-
ther the

AVOIDANCE POINTS

screen or the

CHART

screen.

Editing an

avoidance point at

the avoidance

points screen

To edit an avoidance point, first you must select it. If you have
many stored avoidance points, you’ll probably want to use the
avoidance point sorting and searching features described
above.

To select and edit an avoidance point:

1. At the

AVOIDANCE POINTS

screen, press the

CURSOR

PAD

up or down to select the desired avoidance point.

2. After you’ve selected an avoidance point, press the

EDIT

key. Press the

CURSOR

PAD

left or right to move from

field to field, changing the data in any of those fields,
including the comment line, as desired.

3. When finished, press the

DONE

key to store the changes

to the database and return to the

AVOIDANCE POINTS

screen (or press

CANCEL

to return to the

AVOIDANCE

POINTS

screen).

Editing an

avoidance point at

the chart screen

Editing an avoidance point at the

CHART

screen lets you select

an avoidance point and move it, thereby enlarging its radius.

1. At the

CHART

screen, press the

CURSOR PAD

and if nec-

essary, the

LEFT ARROW

and

RIGHT ARROW

keys, to

select an avoidance point, then press the

CURSOR

menu

key.

2. Press the

EDIT

key.

The 961 returns to the

CHART

screen, showing the

selected avoidance point.

3. Press the

CURSOR PAD

to move the cursor and the

avoidance point to the desired location. Remember: this
location will be the radius.

4. Press the

DONE

key to store the avoidance point to the

avoidance point database (or press the

CANCEL

key to

cancel).

«
...
167
168
169
170
171
...
»

Summary of Contents for 961X























































































































































































































































































































































































Reviews:

No comments

Related manuals for 961X

Brand: Sensitech Pages: 2

Brand: Simrad Pages: 32

Brand: F-Tech Pages: 10

Brand: YF Pages: 18

Brand: Hardi Pages: 30

Brand: Gemini Pages: 24

Brand: Teletype Pages: 2

Brand: Telemetry Solutions Pages: 18

Brand: ECO-WORTHY Pages: 19

Text-N-Track H1000

Brand: Haas GPS Pages: 16

Traffic Assist 7927

Brand: Becker Pages: 2

Brand: Polyend Pages: 47

Brand: AVERATEC Pages: 46

Brand: Made Pages: 35

Brand: NAL RESEARCH CORPORATION Pages: 44

Brand: Avidyne Pages: 41

Brand: Lowrance Pages: 8

Brand: FairwayIQ Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands